GW6 Accona Waterless Urinal Trough - Grey Granite

Please contact us with your project requirements (quantity, lengths and timescale) and we’ll get back to you with current production and delivery times.

 GW6 Accona Waterless Urinal Trough in Grey Granite Finish 

Standard lengths = 1200mm or 1800mm

The GW6 Accona waterless urinal trough uses the same GW6 valve core as the popular GW6 cartridge. The urinal is manufactured in glass-reinforced plastic (GRP) making it robust and resistant to damage

 Key Benefits:

• unique dual valve technology for added protection against odours
• small, replaceable GW6 valve core typically lasts for 6 months, often as long as a year
• no sealant required
• no special tools required for maintenance
• high drainage rate - approximately 30 litres per minute, so can be sluiced
• manufactured in damage-resistant GRP
• simple to fit with the 3 brackets supplied
• waste pipe connection can be horizontal (e.g. through panel) or vertical
• can be manufactured in a range of colours to special order

 Instead of a fluid barrier, the GW6 cartridge uses a silicone double-skirt valve which is tolerant of both water and common cleaning chemicals

 See replacement valves for GW6 products

Includes:
- 1 x GW6 Accona 'grey granite' waterless urinal trough fitted with GW6 housing and valve
- 3 x wall bracket

  Cleaning

The GW6 waterless urinal system is tolerant of standard cleaning chemicals but care should be taken with GRP products. Only mild products should be used. For best results, we recommend Nviro-Clean and Bactericidal Cleaner for GRP urinals.

  How to avoid blockages in waste pipes

Whilst the waste pipes of waterless urinals block less frequently than for most flushed urinals, uric acid salts can still form a sludge which eventually could cause a blockage. Sludge can be a particular problem if the waste pipes are shared with sinks or are poorly configured.  Gentworks recommends periodic sluicing with Bactericidal Cleaner to break down this sludge and carry it away into the main drain. The GW6 valve can be sluiced regularly; once every 2 to 4 weeks is recommended.  The solution used should be approximately 1 part Bactericidal Cleaner to 9 parts warm water from the washroom hot tap. Sluicing volume should be approximately 2 litres for the Accona models.