GW6 Karoo Waterless Urinal Bowl
Out of stock - More Due in Early-Mid July
The GW6 Karoo waterless urinal bowl uses the same GW6 valve core as the popular GW6 cartridge. The urinal is manufactured in ceramic and is suitable for both concealed and exposed pipework. The compact design, projecting only 260mm from the wall, avoids splashback issues by having a deeper than normal bowl, Key Benefits:
Out of stock - More Due in Early-Mid July
Includes:
- 1 x GW6 Karoo waterless urinal
- 1 x waterless GW6 housing and valve
- 1 x 1¼" x 1½" multifit straight connector (ST28M)
- 2 x wall hangers
- 2 x nylon fixing plugs
- 2 x galvanised steel screw hooks
Bowl Dimensions: Height = 522mm Width = 300mm Projection from wall = 260mm
Instead of a fluid barrier, the GW6 cartridge uses a silicone double-skirt valve which is tolerant of both water and common cleaning chemicals.
Click here for more about the GW6. See replacement valves for GW6 products
How to avoid blockages in waste pipes
Whilst the waste pipes of waterless urinals block less frequently than for most flushed urinals, uric acid salts can still form a sludge which eventually could cause a blockage. Sludge can be a particular problem if the waste pipes are shared with sinks or are poorly configured. Gentworks recommends periodic sluicing with Bactericidal Cleaner to break down this sludge and carry it away into the main drain. The GW6 valve can be sluiced regularly; once every 2 to 4 weeks is recommended. The solution used should be approximately 1 part Bactericidal Cleaner to 9 parts warm water from the washroom hot tap.
|